Truck Mounted Deep Water Well Drilling Rig
HM-XSC Series truck mounted drilling rig is designed to meet the needs of high speed, high efficiency and high mobility in field drilling. The rigs are featured if reasonable structure, simple operation, easy maintenance and speedy transport. The maximum drilling depth is 2500m, and hole size is 500-820mm.
Truck Mounted Deep Water Well Drilling Rig Introduction:
1.Road condition adaptive intellective All-terrain Off-road chassis, multi-axle steering intelligent control and multi-steering mode provide flexible steering and small steering diameter. Hydro-pneumatic suspension with a good travelling performance, which adapts severe road conditions such as muddy road, sand, snowfield, upland, etc.
2.Full hydraulic top-drive. Output port adopts floating device, which effectively reduces the wearing of the drill stem thread, and increases service life of the drill stem. Spindle has a strong slag discharge capacity through its large drift diameter, which makes it especially adapt the reverse circulation construction.
3.The feeding system. It has a large stroke by extending completely when working, which adapts to long drill stem and long casing constructions. It retracts when travel to reduce transportation dimensions. It adopts cylinder-wire rope speed multiple feeding system with slow feeding mode, which provides slow drilling and fast lifting. With that it ensures good drilling performance and improves working efficiency.
4.The convenient stem changing mechanism, optioinal independent stem auto-change system and top-drive can use cooperatively, which realizes full automatic of stem loading and unloading, and reduces the number of workers and work intensity on the job site.
5. The advanced and efficient hydraulic control system. The independently developed load sensitivity control system can provide proper flow and pressure to the actuating mechanism according to the loading needs, which is energy efficient. It adopts the proportional control of the major movements, which makes the speed adjust conveniently. With no shock when start and stop, the control is highly accurate.
6. The efficient large torque fastening and unfastening device, it can fasten and unfasten the drill tools rapidly by using with power slip cooperatively, which realizes loading and unloading drill stem without assistance of workers and reduces work intensity.
Applications:
water well, wire-line coring drilling, geothermic well, general investigation and exploration. Road and tall building ground sill exploration and other foundation working.
Specification:
XSC5 XSC6 XSC8 Drilling Capacity Hole Depth(m) 500 600 800 Hole Diameter(mm) 500 500 500 Feeding System Max. Lifting Force(T) 26 32 40 Max. Feeding Force(T) 12 12 15 Max. Lifting Speed(m/min) 30 30 27 Max. Feeding Speed(m/min) 60 60 61 Stroke (mm) 6600 7600 7600/12200 Top Drive Max. Torque (N.M) 9200 13400 13400 Speed (rpm) 200 150 150 I.Dia. (mm) 55 76 76 Floating Distance (mm) 70(option) 70 70 Max. Tilting Angle / / / Engine Type Cummins C150 Cummins C180 Cummins C180 Rated Power (kw) 113 132 132 Tool Winch Hoisting Capacity (T) 15 30 45 Max. Speed (m/min) 30 60 60 Breakout Device Max. Breakout Torque (N.m) 36000 45000 45000 Vise Clamping Range (mm) 0 – 200 0 – 200 0 – 200 Mud Pump Max. Flow (l/min) 800 800 1200 Max. Pressure (Mpa) 9 9 11 Foam Pump Rate of Flow (l/min) / 50 50 Rated Pressure (Mpa) / 10 10 Mud Pipe Internal Diameter (mm) 55 76 76 Pressure (Mpa) 15 15 15 Chassis Drive Mode 6×4 Automobile Chasis 6×6 Automobile Chasis 8×8 Automobile Chasis Rated Power (KW) 196 247 279 Travelling Speed (km/h) 75 70 70 Max. Climbing Gradient (%) 50 50 50 Working Dimension (mm) 10068x2500x4000 12310x3300x13290 12340x3955x16850 Transportation Dimension (mm) Transportation Dimension (mm) 11360x2500x4000 12380x2500x4000 12380x2500x4000 Weight (t) 24 31 36
Inquiry Us
