600m Truck Mounted Borehole Well Drilling Rig Introduction:
| Model Number:|| HM-DY|| Weight|| 970-1800kg|
| Warranty:|| 1 Year|| After-sales Service:|| 7X24hours Available|
| Drilling Diameter:|| 0-500mm|| Drilling Depth:|| 0-600m|
| Drill Pipe Diameter:|| 42-60m|| Max Pull Force:|| 16-30KN|
| Usage:|| Water Well Drilling|| Type:|| Truck Mounted Drilling Rig|
| Drilling Methold:|| DTH Drilling & Mud Drilling|| Winch Drum Capacity:|| 35-65m|
| Matching Power:|| 132KW|| Engine Brand:|| Cummins|
DY600 truck mounted drilling rig is a rotary table drilling rig.
- The truck chassis adopts the special crane chassis of brand SINO TRUCK and the main drive system, the transfer case, gearbox, double hydraulic winch unit, mud pump, rotary table, mast, feed mechanism are set up on the chassis.
- This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
- The power of truck engine transfer to PTO, and then drive drilling rig.
- We install the spare electric engine and clutch implement, so that the rig can work with diesel engine or electric engine.
- We set up a generator (MF) which is convenient to illuminate or work at night.
- The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
- According to client’s requirement, the DY600 can carry out down-the-hole hammer drilling with Air Compressor.
- The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
water well, wire-line coring drilling, geothermic well, general investigation and exploration. Road and tall building ground sill exploration and other foundation working.
| Spec|| Unit|| Value|
| Drilling depth|| m|| 600|
| Drilling diameter|| mm|| 500|
| Speed of turntable|| r/min|| 117; 102; 60; 38; 22; 13;16(reverse)|
| Torque of turntable|| KN.m|| 5.4 – 50|
| Single rope lifting capacity of main winch|| KN|| 50|
| Maximum lifting capacity of main winch|| KN|| 300|
| Single rope lifting capacity of vice winch|| KN|| 60|
| Single rope lifting capacity of vice winch|| KN|| 240|
| The lifting capacity of hook|| KN|| 270|
| Bearing capacity of mast|| KN|| 300|
| The height of drilling tower|| mm|| 12500|
| Drill pipe|| Kelly bar (mm)|| 108×108×7500|
| Assistant pipe (mm)|| Ф89×10×5500|
| 3NB-130 Mud pump|| Diameter of cylinder (mm)|| 100-140|
| Stroke of piston (mm)|| 160|
| Stroke of piston (mm)|| Theoretical flow (L / S)|| 8.4 10.3 12.2 14.3 16.6|
| Theoretical flow (L / S)|| Rated pressure (Mpa)|| 10 8 7 6 5|
| Rated pressure (Mpa)|| Diameter of suction tube (mm)|| 152|
| Diameter of suction tube (mm)|| Diameter of drain pipe (mm)|| 65|
| Diameter of drain pipe (mm)|| Input power (kw)|| 95|
| Truck Chassis|| Drive form|| 8×6|
| Truck chassis|| Model|| YC6A260-33YC water -cooled four strok diesel engine|
| Engine|| Rated power (KW)|| 191|
| Rated power (KW)|| Speed (r/min)|| 2300|
| Size （L*W*H)|| mm|| 11510*2480*2800|