500m Truck Mounted Diamond Core Drilling Rig

500m Truck Mounted Diamond Core Drilling Rig Introduction:

Hardrock GT500 truck mounted diamond core drilling rig is light weight machine for easy transportation in remote and hilly area where it is hard to approach for big machine.

The rig’s control panel and power pack are separated from main machine during transportation. In this way, it can save the transportation cost and make drilling possible in limited area such as on the mountain area with narrow road.

The whole Hardrock GT500 rig can be divided into three to five pieces depending on the real condition at site.

The rig engine is 74kw Cummins engine and it can drill for 500m, 350m and 120m depth for BQ, NQ and HQ wire-line drilling.

This geological drilling machine can be used for wire-line drilling, conventional single tube core drilling and single tube double act core drilling. Therefore it is widely used in different country and favorited by operators.

Main Features:
1. Great energy utilization rate(less energy loss).

2, High operation efficiency.

3, Easier for operation.

Applicable Drilling Method:

• Core Drilling:

1. With NQ, HQ, PQ drill rod
2. With traditional single wall drill rod

• Rotary Drilling:

1. Drilling with tricone bit and drag bit with mud pump or air compressor

• DTH（Down the Hole）Drilling:

1. Perform percussion drilling with hammer and hammer bit driven by air compressor

The drill rigs can do following drilling application:

• Geological core drilling
• Water well Drilling
• Geothermal Drilling
• Pilling Drilling  

Specification: