1500m Truck Mounted Diamond Core Drilling Rig

Hardrock hydraulic geological drilling rig is also called diamond drilling rig. It can be used for exploration for metal and non metal solid mine. It also used for engineering, hydrogeology, oil and gas general survey / investigation.

[ssba]
INQUIRY

1500m Truck Mounted Diamond Core Drilling Rig Introduction:

GT1500 diamond drilling rig is truck mounted type of rig. And it can be customized based on client’s real needs. For upper parts, it is same with GC1500 upper part. It can drill for 1300m and 1000m depth with NQ and HQ drill bit.

The standard version is with 6×4 truck from Schaman or Sinotruck. But it is also possible to use other type of chassis, which client preferred.

The drill rig’s mast length is 12m, which can lift the 2 -3 pieces(6 – 9m length) drill rod one time. It can significantly inmprove the efficient for whole drilling work. And the drill mast is foldable for easier transportation.

This core drill rigs has load sensing hydraulic system from Rexroth or Parker to have accurate control for drilling and traming. It can increase drilling precision for both hole positioning and hole perpendicularity.

Regarding Chassis, the truck, trailer and track are both available to select for client.

Main Features:
1. Great energy utilization rate(less energy loss).

2, High operation efficiency.

3, Easier for operation.

Applicable Drilling Method:

  • Core Drilling:
  1. With NQ, HQ, PQ drill rod
  2. With traditional single wall drill rod
  • Rotary Drilling:
  1. Drilling with tricone bit and drag bit with mud pump or air compressor
  • DTH(Down the Hole)Drilling:
  1. Perform percussion drilling with hammer and hammer bit driven by air compressor

The drill rigs can do following drilling application:

  • Geological core drilling
  • Water well Drilling
  • Geothermal Drilling
  • Pilling Drilling  

Specification:

Main Part Item GT1500
Drilling Capacity BQ 1500m
NQ 1300m
HQ 1000m
PQ 680m
Rotator Capacity RPM 1100RPM(4 gears)
Max. Torque 8000N.m
Main Spindle Hole Diameter 121mm
Max. Spindle Lifting Capacity 150KN
Max. Feeding Force 75KN
Diesel Engine Brand Cummins
Power 145KW
Speed 2200RPM
Main Hoist Capacity Hoisting Force 77kN
Rope Diameter 18mm
Steel Wire Length 60m
Steel Wire Hoist Capacity Hoisting Force 12kN
Steel Wire Diameter 8mm
Steel Wire Length 1500m
Mast Mast Height 12m
Mast Adjusting Angle 0 - 90 Degree
Drilling Angle 45 - 90 Degree
Feeding Stroke 3800mm
Mast Sliding Stroke 1100mm
General Weight 22000kg
Dimension 12000*2500*3000mm
Chassis Schacman 6X4
Mud Pump Flow 320L/Min
Foot Clamp Clamp Hole Dia. 154mm

Inquiry Us

    Your Name :

    Your Email:

    Your Phone: